HeatBreak Hotend E3D V5 1.75mm- Thermal Barrier
The HeatBreak Hotend or Thermal Barrier , is the heart of the hotend. Made of steel, at the bottom of the thermal barrier, is where the filament melts.
For Hotend E3D V5.
Barrier Length: 26mm
It is important that the barrier is well calibrated at the factory, to avoid filament sticking.
When assembling, always ensure a perfect adjustment, between the barrier and the nozzle, to avoid spillage of the filament through the block of the Hotend. We advise the adjustment of the same, always in hot if the Hotend has already been used. Always ensure a good tightening between the barrier and the nozzle.
It comes in two options:
- With Teflon, suitable for filaments with melting temperatures lower than 230 ° C (PLA, Filaflex, etc.)
- Teflon-free, suitable for all materials, especially for filaments with melting temperatures above 230 ° C (mainly ABS)
Both options for passage of M6 and for filament of 1,75mm