NEMA 17 Stepper Motor 1.68A Bipolar 4 wires 77oz
The NEMA 17 Stepper Motor 1.68A Bipolar 4 wires 77oz, is a hybrid stepper bipolar, 1.8 degrees per step and 200 steps/rev.
It is made of neodymium magnets that give higher performance and torque.
The stepper motors can provide direct and precise movements in a small space.
This type of stepper motors are the most used, in the construction of 3D printers and small CNC machines.
They are robust and precise movements.
High power at low speeds, maximum torque is achieved. As with all stepper motors can divide the steps in microstepping (a major division of torque microstepping is lost)
This pole motor has a torque (power) of 5.5kg / cm (77 oz) and a shaft diameter of 5mm
Such motors are connected in drivers (drivers) or bipolar plates specific control for 3D printers and CNC
Technical specifications NEMA 17 Motor 1.68A Bipolar 4 wires 77oz
- Type: NEMA 23
- Step Angle 1.8 degrees
- Steps per revolution: 200
- Voltage: 3VDC
- Current: 1.68A / phase
- Holding torque: +/- 2NM / 12Kg-cm / 175 oz-in
- Number of phases: 2
- Number wires: 4
- Shaft diameter: 5mm
- Max. temp. working: 80 degrees
- Weight: 0.35 kg
- Length: 48 mm