NEMA 23 Stepper Motor 2.8A Bipolar 4 wires 175oz – 12Kg/cm
The NEMA 23 Stepper Motor 2.8A Bipolar 4 wires 175oz – 12Kg/cm, is a hybrid stepper bipolar, 1.8 degrees per step and 200 steps/rev.
It is made of neodymium magnets that give higher performance and torque.
The stepper motors can provide direct and precise movements in a small space.
These types of motors are most commonly used in the construction of little ones-medium power CNC machines. They are robust and precise movements.
High power at low speeds, maximum torque is achieved. As with all stepper motors can divide the steps in microstepping (a major division of torque microstepping is lost)
This pole motor has a torque (power) of 12kg / cm (175 oz) and a shaft diameter of 6.35mm (1/4″)
Such motors are connected in drivers (drivers) or bipolar plates specific control for CNC
Technical specifications NEMA 23 Stepper 2.8A Bipolar 4 wires 175oz – 12Kg/cm
- Type: NEMA 23
- Step Angle 1.8 degrees
- Steps per revolution: 200
- Voltage: 3VDC
- Current: 2.8 A / phase
- Holding torque: +/- 2NM / 12Kg-cm / 175 oz-in
- Number of phases: 2
- Number wires: 4
- Shaft diameter: 6.35mm
- Max. temp. working: 80 degrees
- Weight: 1.0 kg
- Length: 56 mm