NEMA 23 Stepper Motor 270oz – Shaft 6.35 & 8mm

NEMA 23 Stepper Motor 270oz – Shaft 6.35 & 8mm

The Nema 23 stepper motor 270oz, is a  hybrid stepper bipolar, 1.8 degrees per step and 200 steps / rev.

It is made of neodymium magnets that give higher performance and torque.

The stepper motors can provide direct and precise movements in a small space.

These types of motors are most commonly used in the construction of medium power CNC machines. They are robust and precise movements.

High power at low speeds, maximum torque is achieved.

As with all stepper motors can divide the steps in microstepping (a major division of torque microstepping is lost)

This pole motor has a torque (power) of 19kg / cm (270 oz) and a shaft diameter of 6.35mm (1/4″) or 8mm.

Such motors are connected in drivers (drivers) or bipolar plates specific control for CNC.

Available in 6.35mm and 8mm shaft.

Technical specifications Nema 23 stepper motor 270oz

• Model: 57BYGH627, 12HS8430 or similar
• Type: NEMA 23
• Step Angle 1.8 degrees
• Steps per revolution: 200
• Voltage: 3VDC
• Current: 3.0 A / phase
• Holding torque: +/- 2NM / 19Kg-cm / 270 oz-in
• Number of phases: 2
• Number wires: 4
• Shaft diameter: 6.35mm or 8mm.
• Max. temp. working: 80 degrees
• Weight: 1.0 kg
• Length: 76 mm

Connection