Nut Block TR8X8 Lead Screw – Delrin

Nut Block TR8X8 Lead Screw – Delrin

The Nut Block TR8x8 Lead Screw manufactured in Delrin, is a good option for many projects that require linear movement of lead screw

This block is intended for assemblies in which it is not necessary to avoid the backlash effect. This block is a standard non-adjustable version of the nut blocks and therefore no slack can be removed from the block itself. These nut blocks are designed for a movement repetition system in which an accuracy of one-tenth of a millimeter is not required for forward and return movements

It can be mounted on the bottom of a 3 mm plate using 15 mm M5 screws or can also be mounted directly to V-Slot using two channels (slots) with 15 mm M5 screws and two T-Nut. These mounting options allow a large number of modular machine applications. This block can be mounted along the entire length of the V-Slot to create its linear motion.

Note: If you are looking for greater accuracy of the Nut Block TR8X8 Lead Screw, take a look at the Anti-Backlash Nut Block Delrin Lead Screw TR8x8.

Features Nut Block TR8X8 Lead Screw – Delrin

• Tr8 * 8 (P2) Metrics Acme Tap
• Diameter of the spindle: ∅8mm.
• Pitch accuracy: 2mm
• Lead advance: 8mm
• For 4-Starts Lead Screw
• Material: Delrin
• Distance between mounting holes: 20mm.

The Nut Block is used with the TR8x8 trapezoidal Lead Screw

Some example models of Nut Block TR8X8 Lead Screw : Example 1 – Example 2